Wastewater Evaporators
Challenged by regulatory concerns and economic incentives, companies generating water-based waste find an ideal solution from PKG Equipment Inc. Designed for optimal disposal of water effluents, PKG evaporators offer an efficient and economical alternative to the high cost and space demands of liquid waste disposal. By converting the water portion of aqueous waste to vapor and segregating solids and oils, PKG evaporators provide an environmentally safe method of disposal. By reducing the volume of effluent, we enable you to dramatically decrease disposal costs.
In addition to offering two standard gas-fired evaporators, PKG custom designs and fabricates evaporators of different sizes, materials and fuel types.
APPLICATIONS
- Die-casting solutions
- Dye penetrants
- Hydrotesting solutions
- Machining and grinding coolants
- Mop waters
- Oily compressor waters
- Phosphatizing compounds
- Photographic solutions
- Plating solutions/rinse waters
- Tumbling and vibratory solutions
- Water-based cleaners
- Wire-drawing compounds
SYSTEM BENEFITS
- Consistent evaporation rate with humidity or pre-heating liquids
- Easy to install, operate and maintain
- Economical to operate (pennies per gallon)
- Eliminates need for holding tanks and storage drums
- Environmentally accountable
- Low initial capital investment
- Permanent elimination of water portion of aqueous waste
- Reduces effluent volume up to 98%
- Segregates solids and oils
- Simultaneously processes multiple waste streams
SAFETY FEATURES
A state-of-the-art flame monitoring system will shut down the burner should any of the following events occur:
- Low gas pressure
- High gas pressure
- Air failure (loss of combustion air)
- Flame failure
- Flame relay internal errors
OPTIONAL AUTO-FILL MODE
PKG Equipment’s evaporators can be configured with an optional auto-fill system to allow for continuous evaporation of water. The auto-fill system comes equipped with:
- A mounted self-priming centrifugal pump
- Fill piping from pump to evaporator
- Level control for auto-fill
- Low level cut-off for holding tank
SPECIFICATIONS FOR STANDARD GAS FIRED EVAPORATORS
Evaporator #40-250G
- Evaporation rate:
-
35 gal/hr (auto-fill)
40 gal/hr (batch)
- Heat input:
-
440,000 BTUs
- Tank capacity:
-
250 gallons
- Dimensions:
-
89″ x 53″ x 65″ high
- Exhaust stack:
-
10″ diameter (flanged)
- Gas service:
-
10″ – 27″ WC
- Power supply:
-
240/1/60, 20 amps
- Weight (empty):
-
900 lbs.
Evaporator #70-250G
- Evaporation rate:
-
63 gal/hr (auto-fill)
70 gal/hr (batch)
- Heat input:
-
830,000 BTUs
- Tank capacity:
-
250 gallons
- Dimensions:
-
89″ x 53″ x 65″ high
- Exhaust stack:
-
10″ diameter (flanged)
- Gas service:
-
10″ – 54″ WC
- Power supply:
-
240/1/60, 20 amps
- Weight (empty):
-
1000 lbs.